The Single stage regulator with adjustable pressure will reduce the high pressure of a CO2 cylinder to a lower and usable pressure. The ability to adjust the working/output pressure ensures the regulator will be able to meet the needs of any homebrew enthusiast. Comes with 8mm barbed spigot output for easy tube connection.

• High quality design and manufacture.
• Adjustable output / working pressure.
• 8mm barbed spigot output.
• Dual pressure gauges indicating cylinder pressure and output working pressure.
• Industry standard nut, compatible with DIN 477 / BS 341 No. 8 / JIS m22-14 / W21.8-14 / .860″ x 1/14 (covers UK, Europe and Asia).

Instructions

• Tighten the regulator to your CO2 cylinder using a spanner or wrench. Do not use your hands to tighten, it will not create sufficient seal and be likely to leak.
• Set the output pressure to minimum by turning the pressure adjuster knob fully anticlockwise.
• Close the needle valve by turning fully clockwise.
• Open the flow of gas from your CO2 cylinder.
• The cylinder pressure gauge will now indicate the pressure of the cylinder.
• Turn the pressure adjuster clockwise until your desired output pressure is set.